5 features, 6 wireless operation modes, 1 access point mode – AirLive AirMax5X User Manual
Page 10
1. Introduction
AirLive AirMax5X User’s Manual
4
Since 2009, AirLive has added the “Newsletter Instant Support System” on our website.
AirLive Newsletter subscribers receives instant email notifications when there are new
download or tech support FAQ updates for their subscribed airlive models. To become an
AirLive newsletter member, please visit:
1.5 Features
2T2R 300Mbps
IEEE 802.11a/n
Runs from 5.1GHz to 5.8GHz Spectrum
2 x 10/100 Ethernet Port with one Passive PoE port
Built-in 14dBi Antenna
AP, Repeater, Bridge, Client, Router, WISP Modes
Passive 48V PoE Powered
PoE Power Pass-through
Reset button on the POE Injector
Support Wireless Access Control, Client Isolation
1.6 Wireless Operation Modes
The AirMax5X can perform as a multi-function wireless device. Through the AirLive web
interface, users can easily select which wireless mode they wish the AirMax5X to perform.
The AirMax5X can be configured to operate in the following wireless operation modes:
1.6.1 Access Point Mode
When operating in the Access Point mode, the AirMax5X becomes the center hub of the
wireless network. All wireless cards and clients connect and communicate through
AirMax5X. This type of network is known as “Infrastructure network”. Other AirMax5X or
802.11a/n CPE can connect to AP mode through “Client Infrastructure Mode”.