AirLive AirMax5X User Manual
Page 41
4. Web Management: Operation Mode Settings
AirLive AirMax5X User’s Manual
35
Click here to select
SSID for Association
or Signal Survey
To connect with the
selected SSID. This
function is available only
in Client or Bridge Mode
For antenna
alignment. It will
display signal
Select the SSID which you want to connect , and click the “SET SECURIT” , type in the key
if required. Then Click “Save” Buttom. If the key is correct , the AirMax5X will ask users to
reboot the device.
After reboot is finished , the AirMax5X is connected with another remote AP.
It is important that AirMax5X need to set the” transmit distance”. If the AirMax5X can not
connected with remote AP , please change the setting of “transmit distance”.
Detail of the setting, please refer the chapter 4.2.2.2
Tips: Even the IP address of AirMax5X do not need to be the same subnet with the remote
IP. We suggest that it is better to set the same subnet with difference IP address of remote
IP.