AirLive AirMax5X - Manual (Page 42)

4. Web Management: Operation Mode Settings
AirLive AirMax5X User’s Manual
36
4.2.2.2 Radio Mode
To setup the Radio Mode, Please set is same radio mode as your remote AP .
4.2.2.3 Transmit Distance
This area is to set the transmit distance. Longer distance between AirMax5X and Client
required longer ack time out. But AirMax5X users do not need to calculate the ACK time out,
users just need to put the maximum distance between AP and Client. In real application, we
suggest that users and add 2 more Km for transmit distance. For example , if the distance
between AP and Client is 10Km , it is better to set the transmit distance to 12Km
4.2.3 WDS Access Point Mode
In WDS Access Point mode, the AirMax5X functions as a WDS bridge with Access Point
Mode. For WDS Access Point ,it can be connected by other AirMax5X which using the
WDS station. In this mode, the setting is same as Access Point Mode. Please refer chapter
4.2.1 for the detail setting
4.2.4 WDS Station Mode setting
In WDS Station mode, the AirMax5X functions as a client which can connect with remote
WDS Access Point.. In this mode, the setting is same as client infrastructure mode. Please
refer chapter 4.2.2 for the detail setting
4.2.5 AP Router Mode Setting
In AP Router Mode, the AirMax5X behaves like a wireless router. The secondary Ethernet
port of the AirMax5X will become WAN port. Both the wireless and the main Ethernet port
becomes the LAN side. User can manage the AirMax5X through the wireless or main
Ethernet port. And if the remote management is opened, user can also get to manage
AirMax5X via the WAN side.