AirLive BU-3025 - Manual (Page 32)

4. Administrating the Device
AirLive BU-3025 Manual 26
z
H.264/MPEG4:
Select video resolution.
Please note that some video resolution is not available when video encoder is
‘MPEG4’.
When network speed is insufficient, selecting a lower video resolution will help.
z
Frame Rate:
Select video frame rate. Please note that some frame rates are not available when
video encoder is ‘H.264’.
When network speed is insufficient, selecting a lower frame rate will help.
z
Rate Control:
Select video bit rate. You can control bit rate by both Video quality and Bitrate.
Video quality: There are 5 levels of video quality, select ‘very high’ to improve video
quality but consumes more network bandwidth, and select ‘very low’ will decrease
video quality and consumes less network bandwidth.
Bitrate: Input video’s bit rate directly. It must be an integer between 512 and 4000.
Higher bit rate provides better video quality, but consumes more network bandwidth.