AirLive BU-3025 - Manual (Page 42)

4. Administrating the Device
AirLive BU-3025 Manual 36
z
Enable Passive Mode:
Check this box to force IP camera to communicate with FTP server in passive mode.
(Some FTP Server may only work when you check this box, while others don’t).
z
Test FTP:
Click this button to test FTP server settings above immediately.
U
SMTP Server
z
SMTP Server:
Input SMTP server’s IP address or hostname.
z
Port:
Input SMTP server’s port number. In most cases, it should be default value ‘25’.
z
Sender Email Address:
Input the sender’s email address that will appear in the Email send by IP camera.
This will help you to identify the Email sent by this IP camera, and may help when you
have anti-spam software installed (you can set this Email address to ‘White List’ in
your anti-spam software).
z
Receiver #1 Email Address:
Input primary recipient’s Email address. This field is required.
z
Receiver #2 Email Address:
Input primary recipient’s Email address. This field is optional.
z
Subject:
Input Email title that will appear in the Email send by IP camera. This will help you to
identify the Email sent by this IP camera.
z
Authentication:
Check this box when authentication is required by the Email server you’re using. You
also need to input Email server’s username and password in corresponding field.
z
Requires SSL Encryption:
If your Email server required SSL encryption, check this box. Please note that some
Email server uses different port number than standard port 25 when SSL encryption is
used.