AirLive BU-3025 - Manual (Page 36)

4. Administrating the Device
AirLive BU-3025 Manual 30
z
Enable (Window 1 to Window 3):
Check this box to enable this motion detection window. You can select window 1 to 3
to enable up to 3 motion detection windows. When a motion detection window is
enabled, a rectangular will appear on camera’s view, with its title on the top.
To move / resize a motion detection window:
Move: Use the mouse to drag the title text.
Resize: Use the mouse the drag the four corners (upper left/right, lower left/right)
to resize it. If you only want to adjust width or height, drag the four sidebars
(top, bottom, left, and right).
z
Title (Window 1 to Window 3):
Input characters in title field to change motion detection area’s title text, so you can
identify it.
z
Percentage:
Select the percentage of pixel change that will trigger motion detection alert. Select
a lower percentage and you can detect tiny changes in motion detection area.
z
Sensitivity:
Select the sensitivity level that will trigger motion detection alert. Select a higher
sensitivity and you can detect tiny changes in motion detection area.
4.8 PTZ Control
If you mount the IP camera on pan-tilt camera cradles that support pan-tilt control via
RS-485 connection, you can use this function to control pan-tilt camera cradle. Therefore,
you can control the orientation of IP camera from remote place.