AirLive ES-4000 v2 User Manual
Page 13
![background image](/manuals/553875/13/background.png)
Step4.
Select the language and character encoding. (Figure 2-3)
Figure 2-3 Select the language and character encoding
When system can not identify the data character encoding that is going to be saved into database, it
will use the default setting.
Step5.
Go to System ( Interface, enter the following setting: (Figure 2-4)
Provide a valid IP address of the LAN subnet along with its mask, default gateway and DNS
sever address.
Figure 2-4 Interface setting
Please refer to LAN segment setting to set up interface address. For example, if the LAN segment is
172.16.X.X, then any changes made must be within the same segment in order to take effect.
The following table lists the standard virtual IP range, all external real IPs are forbidden.
10.0.0.0 ~ 10.255.255.255
172.16.0.0 ~ 172.31.255.255
192.168.0.0 ~ 192.168.255.255
9