AirLive ES-4000 v2 User Manual
Page 90
Advertising
Figure 7-14 Enter the second entry to enable relay
Figure 7-15 Complete the second entry
Step2.
Enable external senders to send mails via relay, please go to Mail Management Æ Configure
Æ Mail Relay
for settings :
Click
New Entry
.
Check
Domain Name
. (This enables relay to this Domain name)
Domain Name set as hotmail.com
Click
OK
to complete the setup process. (Figure 7-16, 7-17)
Figure 7-16 Enter an domain name to enable relay
Figure 7-17 Domain name setup completed
When Local SMTP Authentication is activated, internal accounts sending mails off-site does not
required setting up the Relay.
86
Advertising