AirLive ES-4000 v2 - Manual (Page 47)

4.3 Setting
Setting
„ Configuration
Allow system administrator to import / export system settings or reset the factory setting or format the
built-in hard disk.
„ Backup System Setting to Local
System settings can backup to the storage section of built-in hard disk automatically or manually. It can
be used for restoring the system settings or downloading system settings as a file onto local computer
for archive purpose.
„ Format Hard Disk
Allow system administrator to format the built-in hard disk.
„ Device Name Setting
System administrator can enter the name of both company and device.
„ Send Mail Alert Notification / Report
When user enables this function, operating log or system error will be timely reported to the system
administrator via e-mail.
„ Management Port of WebUI
ES-4000V2 allows system administrator to perform remote control from everywhere through web
browser. The port number for HTTP or HTTPS protocol is alterable.
The port number is required for accessing the management interface from external network. User can
choose to select HTTP or HTTPS based on the requirement. The port number has to be appended to the
management IP address, such as http:// 172.16.1.254:8080 or https://172.16.1.254:1025.
„ Default Character Encoding of Mail
The device will use the default character encoding on e-mails with unspecified character encoding.
„ The Maximum Entries to be Displayed Per Page
It determines the maximum entries shown per page on each kind of list.
„ Storage Time of Log
It decides the storage time of event log, connection track and quarantined e-mails.
43