AirLive Ether-GSH16TW - Manual (Page 17)

17
Rear Panel
The rear panel of the Switch consists of an AC power connector.
The following shows the rear panel of the Switch.
Figure 5. Rear panel of the Switch
AC Power Connector
This is a three-pronged connector that supports the power
cord. Plug in the female connector of the provided power
cord into this connector, and the male into a power outlet.
Supported input voltages range from 100 - 240 VAC at 50/60
Hz.
Reset:
The Reset button is to reset all the setting back to the factory
default.
Note: Be sure that you recorded the setting of your device,
else all the setting will be erased when pressing the “Reset”
button.