AirLive Ether-GSH16TW - Manual (Page 38)

38
the Web Management Utility, set the Trap IP Address of the
manager where the trap to be sent.
Figure 26. Trap Setting
‹ System Events: Monitoring the system’s trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong
password login, and it will record from where the IP to
be login.
Password Setting
Password is the invaluable tool for the manager to secure Web
Management Switch, use this function to change the password.
If you forget the password, press the “Reset” button in the rear
panel of the Switch, the current setting includes VLAN, Port
Setting… etc. will be lost and the Switch will restore to the
default setting.
Figure 27. Set Password
Backup Setting
The backup tools help you to backup the current setting of the
Switch. Once you need to backup the setting, press the
“Backup” button to save the setting.
To restore a current setting file to the device, you must specify
the backup file and press “Restore” button to proceed the