AirLive Ether-GSH16TW - Manual (Page 37)

37
System Setting
The System Setting includes the System name, Location name,
Login Timeout, IP Address, Subnet Mask and Gateway. Through
the Web Management Utility, you can easily recognize the
device by using the System Name and the Location Name.
The Login Timeout is to set the idle time-out for security issue,
when there is no action in running the Web Smart Utility and the
time is up, you must re-login to Web Smart Utility before you set
the Utility.
Fill up the IP Address, Subnet Mask and Gateway for the device.
Figure 25.
Trap Setting
The Trap Setting enables the device to monitor the Trap through