Toolbar, Configuring the switch – AirLive Ether-GSH16TW User Manual
Page 26
26
Toolbar
The toolbar in the Web Management Utility have four main tabs,
File, View, Options and Help.
In the “File TAB”, there are Monitor Save, Monitor Save As,
Monitor Load and Exit.
z
Monitor Save: To record the setting of the Monitor List to
the default, when you open the Web Management Utility
next time, it will auto load the default recorded setting.
z
Monitor Save As: To record the setting of the Monitor List
in appointed filename and file path.
z
Monitor Load: To manually load the setting file of the
Monitor List.
z
Exit: To exit the Web Management Utility.
In the “View TAB”, there are view log and clear log function, this
function will help you to show trap setting.
z
View Log: To show the event of the Web Management
Utility and the device.
z
Clear Log: to clear the log.
In the “Option TAB”, there are Refresh Time function, this
function helps you to refresh the time of monitoring the device.
Choose 15 secs, 30 secs, 1 min, 2 min and 5 min to select the
time of monitoring.
In the “Help TAB”, there is About function, it will show out the
version of the Web Management Utility.
Configuring the Switch
The 16-Port 10/100/1000Mbps Gigabit Ethernet Web Smart
Switch has a Web GUI interface for smart switch configuration.