AirLive IAR-5000 v2 - Manual (Page 100)

9. Record: Settings
95 AirLive IAR-5000 User’s Manual
The IAR-5000 automatically modifies the plug-in file to suite the
currently attached network. Thus, it is important to download the
plug-in only once the network has been deployed.
LAN to LAN Activity Recording:
IAR-5000 is capable of recording the data transmission among LANs. Supposing users
must access the Internet through an on-site proxy server, then that is the case it is used.
Service Content / Log Recording Settings:
„ Enables you to decide whether to record a service completely. You may record an IP
service completely, or simply the log, or nothing at all.
‹ If set to “Content”, then both the contents and logs of the service will be
available for viewing. Accordingly, it takes up more hard disk space.
‹ If set to “Log”, then merely the logs of the service will be available for viewing. It
takes only a few bytes (a couple of hundred bytes at most) in size per each
service log.
‹ If set to “Not Recording”, then the 8 major services will not be recorded.
Service Log Display Setting:
„ Determines the maximum entries displayed per page.
Report Browsing Settings (Search Results / Audit Report):
„ Provides users with access to service contents by hyperlinks. Service contents are
accessible through the designated IP address and port number within a specific
period of time.
Default Character Encoding for Recording:
„ The default setting will be applied to data of an unidentified character encoding.