AirLive IAR-5000 v2 - Manual (Page 24)

3. Configuring the IAR-5000
19 AirLive IAR-5000 User’s Manual
Step8. Configure the related interface addresses.
„ Type a valid IP address from the LAN subnet in the IP Address field and
configure its netmask, default gateway and DNS address accordingly.
„ To use VLAN, tick Enable VLAN over Port 1 or 2 based on your case and
also assign a VLAN ID to the port.
„
Specify the maximum downstream and upstream bandwidth respectively.
For your reference, you may configure your management address
based on the subnet ranges below:
10.0.0.0 - 10.255.255.255
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255