AirLive IAR-5000 v2 - Manual (Page 29)

4. System
AirLive IAR-5000 User’s Manual 24
Figure 4-2 To change the admin password
4.2 Interface
Interface Address:
„ The administrator can set the IP login information in IAR-5000.
Ping:
„ Enable the function, the user can send Ping (ICMP) packets to Interface.
HTTP:
„ Enable this function, the user can login IAR-5000 Web UI through HTTP protocol.
HTTPS:
„ Enable this function, the user can login IAR-5000 Web UI through HTTPS protocol.
Download Bandwidth and Upstream Bandwidth:
„ The system administrator should set the accurate bandwidth of WAN, in order to be the
basic operation of IAR-5000.
Step1. In System Æ Interface, enter the following setting:
„ Enter the available IP of the LAN subnet in IP Address, Netmask and
Default Gateway column.
„ Enter DNS server 1 or DNS server 2.
„ If necessary, select to enable VLAN feature and provide the VLAN ID
based on the setting.
„ Enter Max Downstream Bandwidth and Max Upstream Bandwidth.
(It depends on the applied flow statistics of the user.)
„ Enable the setting of Ping, HTTP and HTTPS function.
„ Click
OK. (Figure 4-3)