AirLive IAR-5000 v2 - Manual (Page 33)

4. System
AirLive IAR-5000 User’s Manual 28
Reset Factory Default
Step1. In System
Æ Settings Æ System Settings, select Reset Factory Setting and
Format Hard Disk.
Step2. Click the OK in the lower right, it will restore to the factory setting of IAR-5000
and format the disk at the same time. (Figure 4-7)
Figure 4-7 Select Reset Factory Setting
Configure System Email Notification
Step1. Select Enable email notification under System Email Notification section.
Step2. Company Name, enter the name of the company which belong the IAR-5000.
Step3. Device Name, enter the name of IAR-5000.
Step4. Sender Address, sending the e-mail address of the sender.（Some of the ISP
have request to enter in the sender address column）
Step5. SMTP Server, enter the IP address of the delivered e-mail in SMTP server.
Step6. Notification Address 1, enter the e-mail address in the first one position to
receive the alarm message.
Step7. Notification Address 2, enter the e-mail address in the second position to
receive the alarm message.
Step8. Click the lower right OK to set the function of message alarm. (Figure 4-8)