AirLive IP-200PHD-24 - Manual (Page 30)

4. Monitor the Image Section
25 AirLive IP-200PHD-24/IP-200PHD-24B
User’s Manual
4.2 Configure via Web UI
4.2.1 Network
Use this menu to configure the network to connect the device and the clients.
This section provides the menu for connecting the device through Ethernet
cable.
MAC address:
Displays the Ethernet MAC address of the device. Note that user can not
change it.
Obtain IP address automatically (DHCP):
DHCP: Stands for Dynamic Host Configuration Protocol.
Enable this checked box when a DHCP server is installed on the network to
issue IP address assignment. With this setting, the IP address is assigned
automatically. If this device can not get an IP address within limited tries, the
device will assign a default IP address, 192.168.1.100, by itself as the default
IP address.