AirLive IP-200PHD-24 - Manual (Page 35)

4. Monitor the Image Section
AirLive IP-200PHD-24/IP-200PHD-24B
User’s Manual 30
PPPoE:
To enable or disable the PPPoE service here.
User name:
Type the user name for the PPPoE service which is provided by the ISP.
Password:
Type the password for the PPPoE service which is provided by the ISP.
IP address, Subnet mask, and Gateway (read only):
Shows the IP information got from PPPoE server site.
Status:
Shows the Status of PPPoE connection.
4.2.4 Steaming
RTSP is a streaming control protocol, and a starting point for negotiating
transports such as RTP, multicast and Unicast, and for negotiating codecs.
RTSP can be considered a "remote control" for controlling the media stream
delivered by a media server. RTSP servers typically use RTP as the protocol
for the actual transport of audio/video data.
RTSP Port:
Choose the RTSP port. The RTSP protocol allows a connecting client to start a
video stream. Enter the RTSP port number to use. The default value is 554.
RTP Port:
Specify the range of transmission port number of video stream. The default
range is 50000 to 50999. User can specify a number between 1024 and
65535.