AirLive IP-200PHD-24 - Manual (Page 8)

1. Introduction
3 AirLive IP-200PHD-24/IP-200PHD-24B
User’s Manual
1.4 Package Contents
User can find the following items in the package:
z This camera is the main element of the product.
z Camera Stand with screws
z Power adapter dedicates 12V DC electric power output to Network
Camera.
z User’s manual CD provides important information and instructions for
operating the Network Camera.
z Quick start guide provides important information and instructions for
installing this device.
z PoE Accessory (PoE-1P) provides to connect to a network device and
not need to use additional DC injector.
If any of the above items are missing, please contact your dealer immediately.
Note: Using a power supply with a different voltage than the one included with
the Network Camera will cause damage and void the warranty for this product.
Note: This device works with 12 to 24 volt passive PoE. It does not work with
48V 802.3af switches. Do not plug in to 802.3af or 803.3at PoE switch, it can
cost damage to the camera.