AirLive MD-3025-IVS - Manual (Page 27)

6. Configuration
AirLive MD-3025 User’s Manual 23
z LAN Interface: This field allows you to setup the IP network protocol.
- DHCP IPv4: Select this option when your network uses the DHCP server. When the
camera starts up, it will be assigned an IP address from the DHCP server
automatically.
- DHCP IPv4/IPv6: DHCP for IPv6 enables the DHCP server to pass the configuration
parameters (e.g. the IPv6 network addressed) to the IPv6 nodes, which offers the
capability of automatic allocation of reusable network addresses and additional
configuration flexibility. Select this option if your network supports DHCP IPv6
protocol. When the camera starts up, it will be assigned an IP address from the
DHCP server automatically.
- Static IPv4/IPv6: Select this option to assign the IP address to the camera directly.
You can use “AirLive IP Wizard II” to obtain the related setting values.
IP Address
(IPv4/IPv6) Enter the IP address of the camera. The default setting is
192.168.1.100 .
Subnet Mask Enter the Subnet Mask of the camera. The default setting
is
255.255.255.0 .
Default Gateway Enter the Default Gateway of the camera. The default
setting is 192.168.1.254 .
Primary/
Secondary DNS DNS (Domain Name System) translates domain names
into IP addresses. Enter the Primary and Secondary DNS
provided by ISP.
HTTP Port The default HTTP port is 80.
RTSP Port
The default RTSP Port (Real Time Streaming Protocol) is
554.
RTP Data Port RTP (Real-time Transport Protocol) is a data transfer
protocol defined to deliver live media to the clients at the
same time, which defines the transmission of video and
audio files in real time for Internet applications. The default
RTP Data Port is 5556.
z Enable Multicast: Select this option to enable the multicast function of the camera.
Complete the following settings so that you can deliver information from your camera
to multi receivers.
- Multicast Group Address: Assign a category of IP addresses to receive the
information from the camera.