AirLive MD-3025-IVS - Manual (Page 34)

6. Configuration
AirLive MD-3025 User’s Manual 30
- Video Resolution: Select the resolution that you want to see the image on screen
from the pull-down menu. It supports several resolution as below:
1. 2048 x 1536 (3M)
2. 1920 x 1080 (1080P)
3. 1280 x 1024 (SXGA)
4. 1280 x 960 (960P)
5. 1280 x 720 (720P)
6. 720 x 480 (D1)
7. 640 x 480 (VGA)
8. 320 x 240 (QVGA)
9. 176 x 144 (QCIF)
You also need to select a proper Frame Rate setting.
In Intelligent Analysis Mode:
1. 2048 x 1536 (3M)
2. 1920 x 1080 (1080P)
3. 1280 x 1024 (SXGA)
4. 1280 x 960 (960P)
5. 1280 x 720 (720P)
Please be noted that higher resolution and frame rate gets better video quality but
larger network bandwidth.
- Main Stream / Second Stream: Select the streaming format as H.264
(High/Main/Baseline Profile) / MPEG4 / MJPEG.
- Rate Control: Set the proper image quality by selecting Video Quality (VBR) or
Bitrate (CBR) and then select the desired settings from the pull-down menu.
Select Very Low, Low, Normal, High or Very High for VBR.
Input a bitrate range from 384Kbps to 6Mbps for CBR.
- GOV: Set the GOV value by 1~100 seconds.
z Mobile View (Not supported by MPEG4): The camera supports 3GPP specification.
Select the Disable option to disable this feature. Otherwise, select 3GPP Without
Audio or 3GPP With Audio to transfer the video clips without or with audio.
If you use a mobile phone that supports 3GPP, you can also view the real-time
streaming image captured by the camera on your phone (with the default player on
the phone) by entering the RTSP link: