AirLive MD-3025-IVS User Manual

Page 63

Advertising
background image

7. Appendix





AirLive MD-3025 User’s Manual

59



z

S

elect

Sensitivity

to set the detection sensitivity level. Higher sensitivity will make it

easier to detect and less objects missing, but more misjudgments.

z

Select Basic or Advance Mode.

z

Select

Advance mode for more detail settings.

Select Calibration (People or Vehicle Object Sizes)

.

The minimum and maximum

boundary of objects can be specified to improve the detection accuracy. The width
and length values must be at least 6 pixels. If any false detection caused by smaller
objects, you can try to increase the minimum size.

–Min. Size of Calibration: The width and length values must be 6 pixels at least. If any

false detection caused by smaller objects, you can try to increase the minimum size.

–Max. Size of Calibration: It has to be larger than the minimum size and half the frame

size is the most.

z

Object Size: Specify the width and length of an object. The width and length values

must be greater than 16 pixels and smaller than 64 pixels.

z

In

Event Conditions,

you can specify the minimum time interval or quantity for each

alarm. And edit the alarm action in the Set Event Action.

z

Enable / Disable the Counting Result Overlay.

z

Reset Counter: Select the minimum time interval to reset the counter result.

z

Counter Orientation: Select Left-Right to detect objects moving in a horizontal way

and Top-Bottom in a vertical way.

z

Directionality: User can select the detected moving direction from one to another or

both the directions.

z

Statistics Record: You can configure your camera in different ways to generate the

statistics you required and statistic data can be exported in csv format file.

Select

and choose the Statistics Period that you want and also you can export or

reset the result.


A.6 e-Fence

The e-Fence is an electronic fence protection system which is able to detect and send
output alert if any object is entering or leaving the boundaries you set in the camera. This
function can be used in many applications, either as a standalone protection system or
other protection systems such as airports, power plants, radio towers or even military
camps.

Advertising
This manual is related to the following products: