AirLive MD-3025-IVS - Manual (Page 45)

6. Configuration
AirLive MD-3025 User’s Manual 41
- Enable TCP: The camera will send instant message when triggered.
- Enable SD CARD: Image will be saved into local SD Card when triggered.
- Enable HTTP: Camera will send the attachment to HTTP server.
- Trigger digital output: The camera will trigger the connected device on the
camera’s output for 1~60 seconds.
- Audio File Playback: Playback a recorded audio file when triggered.
- Modify/Delete: To change/remove the event profile, select the file on the list and
click Modify/Delete.
Note: To enable the FTP/Email/Samba/TCP/HTTP services, the required settings of
must be completed in the Advance >> Event section.
3. Motion Detection
The Motion Detection option contains the commands and settings that allow you to
enable and set up the motion detection feature of the camera. The camera provides
three detecting areas.
z Follow the steps below to set up the Motion Detection function for the camera:
1. Select Enable Motion Detection.