AirLive NVR4 - Manual (Page 19)

2. Package Contents and Installation
AirLive NVR User’s Manual 14
Put the back panel.
2.3.3 Connect to the NVR
There are various ways you can connect to NVR and below are the suggested methods for
different network setup:
The NVR is placed in a network with a DHCP server: Connect to the NVR by using
“NVR Search” Utility
The NVR is placed in a network without DHCP server (or you are connecting to it
directly): Access NVR with its default IP: 192.168.1.1
2.3.2.1 Use NVR Search Utility
If the NVR is placed in a corporate network or a local area network where a DHCP server is
already presented, install the “NVR Search” utility on the CD from a computer that is on the
same network and locate the NVR with its IP address that is assigned by the top-level
DHCP server.