AirLive NVR4 - Manual (Page 68)

5. System Setup
AirLive NVR User’s Manual 63
Start the event configuration by defining the general settings:
5.3.1.1 Define when will the event alerts be received by the NVR
a. Choose “Always” or “Only during…” under “Event Trigger Duration”
b. For the “Only during…” option, choose the days by using the check-box and then
define the time period in those days in the “Start Time” and “End Time” fields that you would
like the event trigger function to be enabled.
c. Only during period define here will the NVR receive the event alerts from the cameras,
that is, the trigger function will be disabled when it is outside the period.