AirLive NVR4 - Manual (Page 73)

5. System Setup
AirLive NVR User’s Manual 68
5.3.4 Event Triggers
We have finished defining how an event will be triggered and which servers will be
receiving notifications in the previous two sections, now we can finish up the event
configuration by setting:
Which channels will have event trigger function enabled.
What is considered to be an event?
Where the warnings will be sent to and how they will be sent.
5.3.3.1 Enable Event Trigger
a. Use the checkbox to enable event trigger on the desired channels.
b. Use the checkbox to enable system event trigger. The system events are list as below: