AirLive NVR4 - Manual (Page 56)

5. System Setup
AirLive NVR User’s Manual 51
E
n
g
li
s
h
U
s
e
r’
s
M
a
n
u
a
l
Click on “Detect” button for establishing the connection between the NVR and the camera.
If connection establishes, the detailed information of the IP camera should be polled and
displayed as below
Adjust the video format, frame rate, resolution or bitrate… according to your environment.
You can also click on the “Preview” button to preview the live video of the camera. Click
“Add” to finish adding the camera.
Note: We highly recommend our user to choose mpeg4 or H.264 compression format. For
that will not only save the network bandwidth but also save the NVR’s storage space. If it is
possible, we also advised our user to set his surveillance system upon an independent
network segment or VLAN. This should help to avoid the network collision and make the
NVR its best performance.
Note: After auto search, if there was any IP camera marked with “*” on the list, that means
the IP camera was already configured and connected to NVR.