AirLive WP-203G - Manual (Page 106)

9.3 Get Setting Values – “get” Command
“get” command is used to get the setting values of this print server.
The format of “get” command is as following:
get argument
Then the argument value will be displayed after the command. For
example, if I want to get IP address of the print server, I type “get ip”
command and the IP value “IP_ADDR=’192.168.2.2’” is displayed:
admin# get ip
IP_ADDR=’192.168.2.2’
If you enter “get” only, the system will list all available arguments
of “get” command.
The following table lists all the arguments whose value can be got by
“get” command:
Argument Description Example
psname Print server name admin# get psname
PORT1_PS=’PS254896’
password Login password admin# get password
USER_PASSWORD=’airlive’
username Login username admin# get username
USER_NAME=’admin’
ip IP of the print server admin# get ip
AP_ADDR=’192.168.2.2’
gateway Default gateway of the
print server admin# get gateway
DEFAULT_GATEWAY=’192.168.
2.254’
submask Subnet mask of the print
server admin# get submask
SUBNET_MASK=’255.255.255.
0’
Argument Description Example
polling Polling interval (in
second) of the print
server for waiting
printing jobs on the
NetWare server admin# get polling
PORT1_POLLTIME=3
aq1 Name of the printer queue admin# get aq1
101