Anchor NAVI-TRAC 40 WIDE HIP-END - Manual (Page 16)

16
INSTALLING MID PANEL
INSERT FINGERS OF WHEELED PANEL GUIDE INTO
THE OPEN END OF THE RAFTER AND WELDMENT.
TIGHTEN THE BUTTERFLY NUT.
REVERSE FOR OPPOSITE SIDE OF BAY.
RAFTER
WHEELED
PANEL
GUIDE
PULL MID PANEL UP AND
OVER THROUGH CHANNELS IN
RAFTER EXTRUSIONS.
PURLIN SUPPORTS IN 20’ MID BAYS
IN 20’ MID BAYS, INSTALL A SUPPORT PURLIN BETWEEN
THE EAVE AND THE PURLIN AT THE MID-RAFTER
LOCATION. THIS SUPPORT WILL BRACE AGAINST INWARD
DEFLECTION OF THE EAVE BAY THAT COULD OTHERWISE
RESULT IN WATER PONDING IN THE 20 FT. BAY.
IMPORTANT NOTE: TO ENSURE THAT
MID GOES IN SMOOTHLY AND TO
MINIMIZE CHANCE OF DAMAGE TO
FABRIC, ALWAYS USE THE WHEELED
PANEL GUIDE TO FEED KEDAR INTO
FRAME CHANNELS. SEE NEXT PAGE
FOR INFORMATION ON HOW TO
ATTACH PULL ROPES TO MIDS.
NOTE: HIP END FABRIC PANELS NOT SHOWN
SO THAT THE FRAME WILL BE MORE VISIBLE.