APG DCU-1100 user manual - Manual (Page 16)

DCU-1104 and DCU-1108 Rev. A2, 11/06
16
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
MODE DESCRIPTION PARAMETERS
13 Begin Trip 2 Units = Mode 1
Range = 0 - 9999
Default = 3.50
Sets the Begin point for Trip 2 Relay Output.
MODE DESCRIPTION PARAMETERS
14 End Trip 2 Units = Mode 1
Range = 0 - 9999
Default = 4.50
Sets the End point for Trip 2 Relay Output.
MODE DESCRIPTION PARAMETERS
15 Trip 2 Type Range = 0 - 7
0 - near
1 - exclusive
2 - hysteresis near
3 - far
4 - inclusive
5 - hysteresis far
6 - disable
7 - loss of echo
Default = 0
Selects the output type for Trip 2.