APG DCU-1100 user manual - Manual (Page 26)

DCU-1104 and DCU-1108 Rev. A2, 11/06
26
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
• Mode Sheet (continued)
MODE DESCRIPTION PARAMETERS EXPLANATION
9 Loss of Echo Units = seconds
Delay Range=0-9999
Default = 5
10 Trip 1 Begin Units = Mode 1
Range = 0 - 9999
Default = 3.00
11 Trip 1 End Units = Mode 1
Range = 0 - 9999
Default = 4.00
12 Trip 1 Type Range = 0 - 7
0 - near
1- exclusive
2 - hysteresis near
3 - far
4 - inclusive
5 - hysteresis far
6 - disable
7 - loss of echo
Default = 0
13 Trip 2 Begin Units = Mode 1
Range = 0 - 9999
Default = 3.50
14 Trip 2 End Units = Mode 1
Range = 0 - 9999
Default = 4.50
Set the delay in seconds before the
output will show a loss of echo
condition.
Sets the BEGIN point for Trip 1
Relay output.
Sets the END point for Trip 1 Relay
output.
Selects the output type for Trip 1.
Sets the BEGIN point for Trip 2
Relay output.
Sets the END point for Trip 2 Relay
output.