APG DCU-1100 user manual - Manual (Page 22)

DCU-1104 and DCU-1108 Rev. A2, 11/06
22
Automation Products Group, Inc.
APG...Providing tailored solutions for measurement applications
Tel: 1/888/525-7300 • Fax: 1/435/753-7490 • www.apgsensors.com • [email protected]
Software
MODE DESCRIPTION
26 Software Version
Mode 26 displays the software version for the DCU-11. The value
corresponds to the operating version and the approximate date of manufacture.
MODE DESCRIPTION PARAMETERS
27 Autosense Range = 0-1
0 = Manual (user controls Sensitivity and
Pulses)
1 = Autosense (sensor controls Sensitivity and
Pulses)
Autosense mode sets control of the sensitivity and pulses to the sensor. The
DCU-11 will automatically change the sensitivity to match the application.
MODE DESCRIPTION
28 Password
Mode 28 is used to access factory adjustment modes in the sensor.