Autoquip PLTC DOCK LIFT - Manual (Page 44)

44
The following should be referenced in connecting the standard heavy-duty
motors to power sources. Remember that heavy wire must be used all the way to
the power source.
MOTOR CONNECTION DIAGRAMS
Figure 21: Motor Wiring Diagrams
HP and Voltage Full Load Amperages
3 HP: 115 / 208 / 230V /60 CY/1PH
Vertical Motor (Not Super Torque)
115 V = 33.6 Amps 208/230V=16.8 Amps
5 HP: 230 V /60 CY/1 PH
Vertical Motor (Not Super Torque)
230 Volts = 24.5 Amps
5 HP: 208 / 230 V /60 CY/3 PH
Contractor Motor (Super Torque)
208 V=15.8 Amps 230 V=14.8 Amps
5 HP: 460 V /60 CY/3 PH
Contractor Motor (Super Torque)
460 Volts = 7.4 Amps
5 HP: 208 / 230 V /60 CY/3 PH
Vertical Motor (Super Torque)
208 V=16 Amps 230 V=15.2 Amps
5 HP: 460 V /60 CY/3 PH
Vertical Motor (Super Torque)
460 V=7.6 Amps
GENERAL MAINTENANCE