Autoquip PLTC DOCK LIFT - Manual (Page 8)

8
WARNING !
All warning and information decals should be in place as outlined in the
“Label Identification” section. If decals are missing or damaged, they
should be replaced with new ones. Contact Autoquip for replacements.
WARNING !
Lift platforms traveling below floor levels my create openings, and the
shape of the load and how the load is arranged on the lift may create a toe
hazard as the load passes the top edge of the pit. Both situations may
require guarding in accordance with Federal Regulations. Any such
guarding must be installed prior to operating the lift
WARNING !
The hydraulic velocity fuse (HVF) must be properly installed! The HVF
is attached to the elbow fitting in the trust angle port (casing end) of the
cylinder. Do not use a swivel fitting between the HVF and cylinder. If the
HVF is installed improperly, it will not lock up in the event of a catastrophic
hydraulic line break.
WARNING !
Use properly rated hoses only! Never use fittings or hoses that are not
properly rated for the intended use.
WARNING !
Never exceed the rated capacity of the lift! Overloading, or uneven
loading, could result in load instability and cause serious personal injury.
SAFETY PRACTICES