BAND-IT S35099 Automatic Air Tool - Manual (Page 9)

BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-0307 USA
P: 1-800-525-0758
F: 1-800-624-3925 Document # S41067 rev. H
© Copyright
BAND-IT-IDEX, Inc. 2010
All rights reserved
www.BAND-IT-IDEX.com
Page 9 of 34
S35099
Automatic Air Tool
Operating
Instructions
100-120 PSI AIR SUPPLY
Figure 3 – Air Control Schematic
FRONT
PANEL
CLAMP
HOLD
CONTROL
CLAMP PULL
CONTROL
LEGEND:
1 FILTER, AIR
2 LUBRICATOR
3 VALVE, FOOT OPERATED
4 VALVE, CLAMP PULL
PRESSURE CONTROL
5 GAUGE, CLAMP PULL
PRESSURE
6 VALVE, PULL-UP CYLINDER
7 CYLINDER, CLAMP PULL
8 VALVE, TIME DELAYED,
PULL-UP CYLINDER
9 VALVE, TIME DELAYED,
CUT-OFF
10 GAUGE, CLAMP HOLD
PRESSURE
11 VALVE, CLMAP HOLD
PRESSURE CONTROL
12 VALVE, CUT-OFF CYLINDER
13 CYLINDER, CLAMP LOCK
AND CUT-OFF
14 HEAD, CLAMP
15 VALVE, QUICK EXHAUST
16 VALVE, CHECK
17 MUFFLER, AIR EXHAUST
18 GAUGE, AIR SUPPLY
PRESSURE
19 MUFFLER, AIR EXHAUST 1/4
20 TEE, STREET 1/4-18 NPT
21 CROSS, BRASS, 1/4 NPTF,
FEMALE
▲ ON TOOLS SERIAL NUMBER 168 AND UP
NOTES:
1 SYSTEM SHOWN IN NORMAL (OFF) POSITION.
2 TO START CYCLE, DEPRESS FOOT CONTROL
VALVE 3.
3 KEEP FOOT CONTOL VALVE DEPRESSED TO
COMPLETE CYCLE.
4 RELEASE FOOT CONTROL VALVE WHEN THE
COMPLETE CYCLE IS DONE OR TO STOP THE
TOOL DURING ITS CYCLE.
5
□
REFERS TO IDENTIFICATION LETTERS PLACED
ON EACH AIR LINE.