Blue Sea Systems 1408 M-Series Dual Circuit Plus, Main + 3 Position CLB Vertical - Manual (Page 3)

SPECIFICATIONS
1
Stock Panels:
Specifications for this panel are located on the panel product page at
www.bluesea.com. To locate specifications
SEARCH by part number
(four digit number found on the back of the panel) , click the
DETAILED SPECIFICATIONS tab.
The SPECIFICATIONS table contains: specifications for the panel, and a
list of all installed components and their part numbers. To view component
specifications, click each component part number and navigate to
component specifications.
Custom Panels:
A panel wiring schematic and a list of components are included with the panel.
Material:
Metal frame—0.125" 5052 aluminum black powder coat
Front bezels—UV stabilized Polycarbonate ASA blend
Current Consumption:
Backlighting—2.75 milliamperes per nominal circuit
Current Rating:
Busbars—100 amperes
Note: If hot feed wire is attached in the center of the bus it allows each bus
to carry up to 200 Amperes.
Available Panel Voltages:
Panel—12 Volt DC, 12/24 Volt DC, 120 Volt AC, 230 Volt AC, 240 Volt AC
Backlighting and circuit status indication—12 Volt DC, 24 Volt DC by replacing
existing LED harness with 12 to 24 Volt Conversion Kit (PN 4113)
Circuit breakers can be replaced by breakers with different ratings.
For more information go to www.bluesea.com