Carbolite nanodac - Manual (Page 116)

nanodac™
MC27 –EN– 1.04
114
The application view then becomes live
Figure F1c Heat Cool Live Application
The following parameters may be monitored/adjusted:

Target setpoint

Select Auto/Manual and adjust the output power manually if in Manual.

Monitor the current Process Variable, Active Output demand, Working Setpoint and Error.

Monitor alarms. The alarm beacon turns red when an alarm occurs.

Acknowledge alarms. Pressing the Acknowledge button acknowledges the selected alarm in the
nanodac instrument. If the alarm is still active the alarm beacon remains red. If the alarm is no longer
active the beacon reverts to its dark colour.