Carbolite 302P4 - Manual (Page 17)

Programming
17 MC22-GB-V1.00
4.8 Running a program
Ensure the controller is in the basic operator mode parameter OP.b.
Press function

to show nPrG lower display and the program number in the upper display.
Press the Up

or Down

to choose the program number.
Press

to enter to select the required program number.
Table below shows the key presses to run a program
Operation Action Indication
To RUN a program Press for more than
1.5 seconds.
Run indicator = On
To HOLD a
program Press for more than
1.5 seconds. Run indicator = On
Lower Display = HOLD
To CANCEL a
program Press for more than
5 seconds Run indicator = Off
Program Ended Run indicator = Off
Lower Display = END
To RESET after a
program has
completed Press or

or

or

once

Run indicator = Off