Carbolite 302P4 - Manual (Page 24)

Programming
24 MC22 -GB-v1.01
To adjust both offset and slope.
Clear any previous coefficient adjustment.
Press function

until CL.St is shown in the lower display
Press the Up

or Down

to C.CL3 in the upper display
Press function

to confirm selection and display OFSt
Press the Up

or Down

to enter the offset value required across the temperature range
(see above formula). This can be a negative or positive value.
Press function

to confirm selection and display SLOP
Press the Up

or Down

to enter the slope value required (see above formula).
Press function

to confirm

