Carlin 301GAS Inst Manual - Manual (Page 22)

Model 301GAS burner — Instruction manual
Carlin part number MN301GAS Rev. 03/14/11
– 22 –
Where appliance instructions differ from this manual, follow the appliance instructions.
9. Replacement parts – Gas train
Item
number
Description Part
number
1 Pipe plug, 1/4” NPT (3 required) Obtain locally
2 Gas cock, 1” NPT 99225
3 Pipe nipple, schedule 40 steel, 1” NPT x 2” long Obtain locally
4 Low gas pressure swtich 99234
5 Pipe nipple, schedule 40 steel, 1/4” NPT x 2” long Obtain locally
6 Pipe nipple, schedule 40 steel, 1” NPT, with 4 x 4 junction box 99517
7 Primary gas valve, Honeywell V48A, 1” NPT
Bleed restrictor, fixed 99227
99228
8 Pipe nipple, schedule 40 steel, 1” NPT x 4” long Obtain locally
9 Pipe nipple, schedule 40 steel, 1” NPT x 2” long Obtain locally
10 Gas pressure regulator, 1” NPT, Maxitor RV-61
Vent limiting orifice
99233
Apply local
codes
11 Pipe nipple, schedule 40 steel, 1” NPT x 6” long, with 1/4” NPT tapping 99239
12 Secondary gas valve, Honeywell V4295A, 1” NPT 99229
13 Union, black iron, 1” NPT Obtain locally
14 Orifice nipple: 1” NPT schedule 40 steel x 2”; with orifice plug (with starter orifice, 9/32” drill) 9925020
15 Pipe elbow, 90° black iron, 1” NPT Obtain locally
16 Pipe nipple, schedule 40 steel, 1” NPT x 3” long Obtain locally
17 High gas pressure switch 99235