Carlin 201GAS - Manual (Page 20)

Model 201GAS burner — Instruction manual
Carlin part number MN201GAS Rev. 03/14/11
– 20 –
Where appliance instructions differ from this manual, follow the appliance instructions.
9. Replacement parts
Item
number
Description Part
number
1
1a
Air tube with gas manifold & diffuser (specify overall length of air tube)
Gas manifold (specify air tube length, diffuser and firing rate) Contact factory
Contact factory
2 Gasket, mounting flange 40287
3 Blower housing (burners with A or B diffuser)
Blower housing (burners with C diffuser) 98529
Contact factory
4 Air band (four-slot)
Air band (two-slot) 47001
98542
5 Airflow switch and mounting plate assembly 98521
6 Blower inlet sensing line 98557
7 Blower outlet sensing line 98558
8 Gas valve, VR4305M-4540 98523
9
9a
Gas line union, ¾"
Gas orifice nipple, ¾" NPT both ends x 4” Starter hole orifice
Drilled to size 29652
9938440XX
Contact factory
10 Blower wheel 28563
11 Motor, 1/6 HP (140- WATT PSC) 98611
12 Junction box, 4" x 4", with grommet, lock washer, conduit nipple (to burner housing), and
bracket (not shown)
Contact factory
13 Hinged cover plate for Carlin ignitor 98534
14 Ignitor, Carlin electronic Model 41800 4180002
15 Primary control, Carlin 60200FR microprocessor flame rod control 6020002FR
16 Ignitor electrode/flame rod assembly, complete (depends on air tube length) Contact factory
17 Electrode holding base with hardware (depends on air tube length) 23135S
18 Flame rod (depends on air tube length)
Contact factory 19 Ignitor electrode (depends on air tube length)
20 Ignitor electrode/flame rod support rod (depends on air tube length)
21 Ignitor electrode/flame rod locator bracket Not available
separately
22 Welded flange (when supplied) Included with
air tube
23 Standard universal flange (supplied with burners without welded flange) 59642BLU
24 Optional forced draft flange 59444BLU
25 End cover plate (only on burners with C diffusers) 98331