CCTV Camera Pros iDVR-PRO Video Surveillance DVR for CCTV Camera Pros User Manual
Page 10
10
C
C
O
O
N
N
N
N
E
E
C
C
T
T
&
&
P
P
O
O
W
W
E
E
R
R
O
O
N
N
• Connect up to 16
CAMERA INPUTS
as necessary.
The DVR also has
LOOP OUTPUTS
so that any signals can be fed to other equipment if required.
Termination is automatically set by the DVR depending on connection type.
• Connect one or more monitors to the DVR using the
COMPOSITE, VGA, S-VIDEO or HDMI
connections
• Connect power to the DVR. The DVR checks for proper power connection and emits two beeps.
Press the
POWER BUTTON
on the front panel of the DVR to begin operation.
The DVR startup screen detects and checks the status
of hard drives and the CDRW / DVR-RW drive.
After startup diagnostics are complete, the operator must logon to the
system. The default user name is ‘ADMIN’.
Using the
CHANNEL SELECTION
buttons, key in
the default password of ‘1234’ and press the
ENTER
button.
The DVR begins normal operation and shows the default display of all
16 channels.
The status bar(Include menu control) at the bottom of the screen shows
menu first time. After that, it will show the current time and date.
A title for each channel is shown.
The red square and letter ‘T’ in the top right of each channel display
shows that the channel is recording in Timer / Schedule mode.