CCTV Camera Pros iDVR-PRO Video Surveillance DVR for CCTV Camera Pros User Manual
Page 41
41
R
R
E
E
C
C
O
O
R
R
D
D
M
M
E
E
N
N
U
U
Click the
SIZE, FPS, QUALITY and AUDIO value.
Then click the value with button to change.
Press
ENTER
. Recording settings for the selected time period are displayed.
16 channels are divided into two groups. Maximum recording frame rate for each group is 240FPS at resolution of 1CIF
(352x240).
4 channels can be recorded in full D1 (4CIF@704x480) resolution, maximum 2 channels from each group.
SIZE : Recording resolutions of 352x240, 704x240 or 704x480(NTSC) can be selected for each channel.
FPS : Frame rates between 1 and 30 can be set for each channel.
QUALITY : Four different picture recording qualities can be set for each channel.
AUDIO : If audio devices are connected to the DVR, user can select the audio recording on/off.
any audio channel can be assigned to any of the video channels. Please refer to camera setup menu.
During playback, when a particular channel is selected in full screen, the assigned audio channel will be played back at
the same time.
Adjust values as desired ,and select OK to finish and return to the parameter menu.
Other time periods can be configured in the same manner.
Remember that if SCHEDULE MODE is set to WEEKLY, recording settings need to be changed for each day
as well as for each particular time.
Note: The DVR supports a maximum recording rate across all channels of 480 frames per second at 352x240
resolution. As settings are adjusted, the ‘frames available’ at bottom left displays the number of
available frames still remaining and must always be zero or higher.
If, while changing recording settings, this figure becomes negative, recording resolutions
and / or frame rates must be lowered to increase the ‘frames available’ value to zero or above.