CCTV Camera Pros iDVR-PRO Video Surveillance DVR for CCTV Camera Pros - Manual (Page 34)

34
S S Y Y S S T T E E M M S S E E T T U U P P
EVENT / SENSOR : ALARM OUTPUT
Click the ALARM OUTPUT menu and click each value.
Determines the behavior and actions that will trigger each of the 8/16 alarm outputs.
Behavior settings
ALARM OUT : Choose which alarm output to configure.
OPERATION : The selected alarm output can be enabled or disabled.
MODE : Can be either TRANSPARENT (the output is active only when the trigger criteria is present)
or LATCHED (the output is active for a set period of time after a trigger).
DURATION : In LATCHED mode, the time that the alarm output remains active after it has been triggered.
TYPE : Can be set to high (0V to +5V when activated) or low (+5V to 0V when activated).
HDD EVENT : Determines whether a hard drive event triggers the alarm output.
Action settings
ALARM : Determines whether alarm inputs will trigger the alarm output.
VIDEO LOSS : Determines whether video loss on any of the selected channels will trigger the alarm output.
MOTION : Determines whether motion detection on any of the selected channels will trigger the alarm output.
Remember to select APPLY and press ENTER to save all settings before exiting these menus