CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System - Manual (Page 133)

Configuring Main System 1
Adding IP Video Sources
The setting procedures may vary slightly among IP camera, video server and compact DVR. The
following procedures are the example of setting up an IP camera in the system:
1. Click the Configure button (No. 14, Figure 1-2), select General Setting, select Camera / Audio
Install and click IP Camera Install. This dialog box appears.
Figure 1-116
2. Check Install IP Camera, select the number of IP cameras you want to link to, and click
Configure. This dialog box appears.
Figure 1-117
z To automatically set up an IP camera, click Scan Camera to detect any IP cameras on the
same LAN. Note that the Scan Camera function only works for GeoVision IP products.
z To manually set up an IP camera, click Add Camera.
The following steps are the example of manual setup.
3. Click Add Camera. This dialog box appears.
Figure 1-118
119