CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual
Page 312
298
For the 3G-enabled mobile phone, you can receive live video from the GV-System without installing the
related GV mobile applications first. For the port settings of 3GPP, see WebCam Server Settings
earlier in this chapter.
Note: When you access the GV-System by the mobile phone, you will be forwarded to the designated
web page as shown below. If the displayed web page is different from this, please try to enter the IP
address of the GV-System
Figure 6-55
PDA
GView V2 is a remote view application for Pocket PC device. It can run on PDA using Windows Mobile
5.0 and 2003.
When GView V2 detects the big screen panel of the mobile phone, images from the connected
G-System will be horizontally rotated for a better view. Resolution is set to be CIF by default.
GView Installation
GView V2 is included in the Surveillance System Software CD. This application should be installed in a
PDA device with Microsoft Pocket PC operating system.
1. Plug your PDA via USB or COM port to a computer installed with Microsoft ActiveSync (The
Microsoft ActiveSync program should come with your PDA software CD. Consult your PDA user’s
manual).
2. Run
Microsoft ActiveSync in the connected computer. Make sure both the PDA and computer
are synchronized.
3. Insert the Surveillance System Software CD to the computer. It runs automatically, and a window
pops up.
4. Select
the
Install V 8.2.0.0 System item, and then click Microsoft PDA Viewer V2.
5. Follow the on-screen instructions to complete the installation.