Setting up password – CCTV Camera Pros Geovision 8.2 Multicam Digital Surveillance System User Manual
Page 52
Advertising
38
Setting Up Password
The password setup allows you to assign permission and rights to users. You can create up to 1,000
passwords. The system will control and restrict access to system resources based on the permission
and rights associated with each user account. Only Supervisor account level is pre-set with the access
to the Password Setup function. Click the Configure button (No. 14, Figure 1-2), point to General
Setting, point to Password Setup, and then select Local Account Edit to display the following
window.
Figure 1-34
Adding a new user:
1. Click
the
New button at the lower-left hand corner to bring up the New Account dialog box.
Figure 1-35
Advertising