Warning, Caution, Notice – COATS Vero Series Wheel Balancer User Manual
Page 4
Safety Notices and Decals
WARNING
Failure to follow danger, warning, and caution
instructions may lead to serious personal
injury or death to operator or bystander or
damage to property. Do not operate this
machine until you read and understand all
the dangers, warnings and cautions in this
manual. For additional copies of either, or
further information, contact:
Hennessy Industries, Inc.
1601 JP Hennessy Drive
LaVergne, TN 37086-3565
(615) 641-7533 or (800) 688-6359
www.ammcoats.com
The motor unit of this machine contains a Class IIIa
laser with a maximum output less than 5mW at a wave
length of 630-680 nm. Avoid Exposure - Laser radia-
tion is emitted from its aperture.
CAUTION
Use of controls, adjustments or performance
of procedures other than those specified
herein may result in hazardous radiation
exposure.
In case of failure, the entire motor unit must
be replaced.
iv •
Important: Always read and follow instructions.
Read entire manual before assembling,
installing, operating, or servicing this
equipment.
NOTICE