COATS Kit 85000440, Lift Accessory - Manual (Page 2)

Wheel Lift Installation
Always DISCONNECT THE ELECTRICAL
POWER before servicing equipment. This
prevents electrical shock or accidental
movement of the systems operated by the
electrical power.
Always DISCONNECT AIR SUPPLY before
servicing equipment. This prevents acciden-
tal movement of systems operated by com-
pressed air which may result in personal
injury. BLEED THE AIR SYSTEM by actuating
all the valves.
STAY CLEAR OF MOVING PARTS when
reconnecting the unit to the air supply. The
position of control valves may have
changed during the servicing of the
machine.
50xx, 60xx, 70xx Series Instructions
1. Disconnect the electric and air power supplies to
the machine and wait for the air pressure to deplete.
2. Disconnect the supply air line from the bottom of
the lift control valve.
3. If applicable, remove lube bottle and bracket
located on the chassis side panel. Set lube bottle aside.
4. If applicable, install new lube bracket on tire
changer tower using the supplied 6-inch hose clamp.
Be sure to position hose clamp and bracket were it
does not cover any important safety information on the
large safety decal. Place lube bottle into bracket.
CAUTION
CAUTION
CAUTION
2 • COATS Wheel Lift Kit